Rectifier on a 1997 Honda CBR 1100xx Blackbird
Pictures and location of the Rectifier.
Under the rear fairing cover by the seat,
above the front sprocket ,on the frame, is the rectifier.
Darker for more contrast
The connector is below the rectifier.
Below is the Connector orientation.
Wire diagram.
Below is the link to Justin's web page where
his Rectifier "Upgrade" collage comes from.
http://www.vlc.com.au/~justin/about/bikes/honda/reg_replace.html
Comparing the OEM Honda Rect to an improved one with cooling fins.
The new one needs the frame to be drilled to accept a bolt.
Looking good installed in the OEM location.
Above he ties into the original wiring harness.
Then push the wires through the frame to accept the new Connector for the Rectifier.
Complete
Here's his photo of his installation. Pretty good upgrade IMHO.
Back: to the Bike Index page